GYEON Q²M Prep

GYEON Q²M Prep – Ceramic Coating Surface Preparation Spray

GYEON Q²M Prep is a dedicated surface preparation spray for the final cleaning stage before a ceramic coating. It dissolves polishing oils, oily contamination and wax residue, helping you start with a surface that is ready for protection.

Paint can look clean after polishing while still carrying residues that interfere with coating application. Prep helps remove those residues and makes it easier to inspect the finish you have actually achieved. Use it after the washing, decontamination and correction stages, with clean microfibre towels and good lighting.

Key Benefits

• Removes polishing residue: Helps clear the oils and fillers left by paint correction products.
• Supports coating bonding: Provides the clean surface a ceramic coating needs for consistent application.
• Improves inspection: Lets you assess the paint without oily residue masking the finish.
• Ready to use: Fits directly into a detailing routine without mixing a separate panel-wipe solution.
• Antistatic finish: Leaves the prepared surface ready for the next step.

Product Details

Where Prep Fits in a Coating Installation

Use Prep near the end of surface preparation: wash, remove bonded contamination as needed, correct paint defects if desired, then degrease. For the next stage, read our quick guide to ceramic coatings.

How to Use

1. Wash and decontaminate the vehicle. Complete any polishing before the final preparation wipe.
2. Work on a cool, dry surface in good lighting. Set aside clean towels specifically for this step.
3. Spray Prep onto the surface or a soft microfibre towel, then wipe gently in straight passes.
4. Use a second clean towel to finish removing residue. Change towel faces frequently and repeat where necessary.
5. Allow the surface to dry completely. Follow the coating’s specified waiting time before application; current Mohs EVO guidance calls for 15 minutes after Prep.

Application Tips and Things to Watch For

Prep is a preparation product, not a maintenance detailer. Do not use it to add gloss or refresh a protected car. Follow the label for handling and ventilation, and check compatibility before using it on an unfamiliar repair or sensitive finish.

Wiping a dirty panel with Prep is not a substitute for washing. Likewise, it should not be relied on to remove an established ceramic coating. Choose the correct cleaning, correction or coating-removal process for the surface you are working on.

Frequently Asked Questions

Do I need Prep after polishing?

A final degreasing step removes polishing oils and helps prepare the surface for coating. Even when the paint looks clear, residue may remain. Use clean towels so you remove the contamination instead of redistributing it.

Can Prep replace an iron remover or clay bar?

No. Those products address bonded contamination. Prep addresses oily residues after the earlier cleaning and correction steps. Each has a different role in preparing paint.

Does Prep leave a protective layer?

No. Its purpose is to clean the surface before protection. Once it has dried and the coating’s waiting time has passed, apply your selected coating according to its instructions.

How much should I buy?

GYEON’s approximate consumption is 150 ml per car, but the vehicle size, amount of polishing residue and number of wiping passes affect usage. A larger bottle is useful when preparing several vehicles or multiple surfaces.