{"product_id":"gyeon-q-m-total-remover","title":"GYEON Q²M Total Remover","description":"\u003ch2\u003eReset Existing Protection Before Your Next Coating or Sealant\u003c\/h2\u003e\n\u003cp\u003eGYEON Q²M Total Remover is a chemical protection remover for preparing a vehicle for its next detailing stage. It is designed to degrade existing waxes, sealants and coatings, helping you address an old protective layer without automatically starting with abrasive polishing. Available in 500ml and 1L, it is useful when changing protection products or preparing a surface that has an unknown treatment already on it.\u003c\/p\u003e\n\u003cp\u003eA protection reset and paint correction serve different purposes. Total Remover targets existing protective products; polishing addresses defects such as swirls and scratches. If the finish is already in good condition, chemical removal may help reduce the need for unnecessary abrasive work. If it is damaged, the vehicle may still need correction before new protection is applied.\u003c\/p\u003e\n\u003ch2\u003eWhen GYEON Total Remover Is Useful\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChanging waxes or sealants:\u003c\/strong\u003e reduce interference from previous protection before starting a new system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparing for a coating:\u003c\/strong\u003e chemically degrade an existing layer as part of the preparation process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResetting an unknown finish:\u003c\/strong\u003e help address protective products left by previous detailing work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparing a new vehicle:\u003c\/strong\u003e remove compatible factory-applied or delivery-stage waxes where present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking on finishes unsuitable for routine polishing:\u003c\/strong\u003e provides a non-abrasive preparation option for compatible matte paint and film surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 500ml and 1L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e chemical wax, sealant and coating remover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e apply to a clean, wet section, distribute with a suitable wash mitt and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e deliberate reduction or removal of existing protection before further preparation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResult:\u003c\/strong\u003e depends on the protective product, its condition and the treatment process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use GYEON Total Remover\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash the vehicle.\u003c\/strong\u003e Remove dirt and loose contamination first. Chemical stripping should begin on a clean surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck compatibility.\u003c\/strong\u003e Confirm the paint or film manufacturer's cleaning guidance and test a small area, especially on matte finishes and unfamiliar materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare a cool, wet panel.\u003c\/strong\u003e Work in the shade with a rinse method ready. Treat one manageable section at a time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply and distribute.\u003c\/strong\u003e Spray the product over the section and spread it evenly with a clean, suitable wash mitt. Keep it away from materials that have not been confirmed compatible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the bottle's contact time.\u003c\/strong\u003e Keep the surface wet throughout and do not allow the cleaner to dry. Do not extend the dwell time in an attempt to force complete removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse thoroughly.\u003c\/strong\u003e Flush away the cleaner and loosened residue. Inspect the result and repeat the process only as needed and as directed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete the remaining preparation.\u003c\/strong\u003e Dry and inspect the surface, address contamination or defects where required, and carry out the final preparation specified by your chosen coating or sealant.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eThings to Watch For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis product intentionally attacks protection. Do not use it as a routine maintenance wash when the goal is to preserve an existing coating.\u003c\/li\u003e\n\u003cli\u003eDo not assume every cured ceramic coating will be completely removed in a single application.\u003c\/li\u003e\n\u003cli\u003eA change in water beading is a useful observation, but it does not independently prove that every trace of coating has gone.\u003c\/li\u003e\n\u003cli\u003eAvoid hot panels, direct sunlight and drying residue. Keep control of overspray and rinse adjacent areas where needed.\u003c\/li\u003e\n\u003cli\u003eRemoving protection does not make scratched paint, damaged film or an etched finish look new.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill Total Remover completely remove any ceramic coating?\u003c\/h3\u003e\n\u003cp\u003eNo universal one-step result should be assumed. GYEON describes it as degrading coatings to support preparation and bonding. The coating chemistry and remaining condition determine whether further treatment or polishing is required.\u003c\/p\u003e\n\u003ch3\u003eIs this the same as GYEON Prep?\u003c\/h3\u003e\n\u003cp\u003eNo. Prep is used for final degreasing and residue removal before coating. Total Remover targets existing protective layers. Depending on the chosen coating system, a job may need both stages.\u003c\/p\u003e\n\u003ch3\u003eCan it remove scratches or swirl marks?\u003c\/h3\u003e\n\u003cp\u003eNo. It does not level paint defects. If correction is required, assess the finish and use an appropriate polishing process before applying new protection.\u003c\/p\u003e\n\u003ch3\u003eCan it be used on matte paint or paint protection film?\u003c\/h3\u003e\n\u003cp\u003eGYEON lists use on compatible matte finishes and PPF. Follow the finish or film manufacturer's instructions and test first, since abrasive correction may not be available if a delicate finish is affected.\u003c\/p\u003e\n\u003ch3\u003eShould I use it for ordinary hard-water spots?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/carzilla.ca\/products\/gyeon-q2m-waterspot-1000ml\"\u003eGYEON WaterSpot\u003c\/a\u003e is the targeted mineral-deposit cleaner. Total Remover serves a different purpose: resetting existing protection when you plan to prepare and protect the surface again. \u003cspan style=\"color: rgb(255, 255, 255);\"\u003eStrip wash\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/tUQtr3zHbhs?si=UcDI9BvxC6Wu7jXE\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"CARZILLA","offers":[{"title":"500ml","offer_id":67713568243991,"sku":"4925","price":178.0,"currency_code":"AED","in_stock":true},{"title":"1L","offer_id":67713568276759,"sku":"4926","price":271.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1014\/6136\/0919\/files\/GYEON-Q2M-Total-Remover-500ml.webp?v=1791430832","url":"https:\/\/bellemapple.com\/products\/gyeon-q-m-total-remover","provider":"powered by bellemapple","version":"1.0","type":"link"}