{"product_id":"gyeon-q-m-foam","title":"GYEON Q²M Foam","description":"\u003ch2\u003eGYEON Q²M Foam – Concentrated Snow Foam Pre-Wash\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Foam\u003c\/strong\u003e is a concentrated snow foam for the pre-wash stage. Applied through a suitable foam lance, it clings to the exterior and helps loosen dirt before the vehicle is washed with a mitt and shampoo.\u003c\/p\u003e\n\u003cp\u003eThe purpose of pre-washing is to reduce the amount of contamination left for the contact wash to handle. Foam is useful on coated and uncoated vehicles, especially when you want to maintain a corrected finish with careful washing habits. Rinse the loosened dirt away before moving to the next step.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wash cleaning:\u003c\/strong\u003e Helps loosen road dirt before physical contact with the paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClinging foam:\u003c\/strong\u003e Provides coverage while the cleaner works on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentrated format:\u003c\/strong\u003e Allows dilution to suit your foam-lance setup and cleaning needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating-compatible maintenance:\u003c\/strong\u003e Suitable for coated and uncoated vehicles when used correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports careful washing:\u003c\/strong\u003e Reduces, rather than replaces, the cleaning work required from the wash mitt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eConcentrated snow foam pre-wash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFoam-lance mixing guidance\u003c\/th\u003e\n\u003ctd\u003e1 part product to 5–15 parts water; follow bottle and equipment guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical dwell guidance\u003c\/th\u003e\n\u003ctd\u003eApproximately 4–5 minutes, only while the foam remains wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e1 L and 4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWork on a cool vehicle away from direct sunlight. Check that you can rinse the full working area promptly.\u003c\/li\u003e\n\u003cli\u003eMix Foam with water in the lance bottle according to the product label and your equipment. The bottle ratio is not the final concentration reaching the paint.\u003c\/li\u003e\n\u003cli\u003eApply an even layer with the foam lance, working from lower areas upwards where practical.\u003c\/li\u003e\n\u003cli\u003eAllow the foam to dwell while monitoring it. Rinse sooner than the suggested time if any area starts drying.\u003c\/li\u003e\n\u003cli\u003ePressure-rinse thoroughly to remove loosened dirt.\u003c\/li\u003e\n\u003cli\u003eContinue with a suitable contact wash, final rinse and drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eApplication Tips and Things to Watch For\u003c\/h2\u003e\n\u003cp\u003eNever allow snow foam to dry on the vehicle. Wind, sunlight, panel temperature and dilution can all affect dwell time. A thick-looking blanket is not permission to leave the product unattended.\u003c\/p\u003e\n\u003cp\u003eDo not drag a wash mitt through dirty pre-wash foam as a shortcut. Rinse the loosened contamination away first, then use fresh shampoo solution and clean wash media. Follow your pressure washer’s guidance for safe distance and use around vulnerable trim.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan Foam replace a hand wash?\u003c\/h3\u003e\n\u003cp\u003eIt can remove a useful amount of loose and softened dirt, but traffic film may remain. A careful contact wash is usually needed for a thoroughly clean surface before drying or adding protection.\u003c\/p\u003e\n\u003ch3\u003eWhat dilution should I start with?\u003c\/h3\u003e\n\u003cp\u003eCARZILLA lists a foam-lance range of 1:5 to 1:15, meaning product to water in the bottle. Use the bottle directions and adjust for your lance’s delivery rather than assuming every setup produces the same output.\u003c\/p\u003e\n\u003ch3\u003eDo I need to agitate the foam?\u003c\/h3\u003e\n\u003cp\u003eThe pre-wash stage is normally allowed to dwell and then rinsed away. Leave the main contact cleaning to the shampoo wash after the dirty foam has been removed.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for ceramic-coated cars?\u003c\/h3\u003e\n\u003cp\u003eYes. Use it as part of a maintenance wash, then follow with an appropriate shampoo. The coating still benefits from clean wash tools, sensible pressure-washing technique and gentle drying.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nfWxuHmp8CY\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"CARZILLA","offers":[{"title":"1L","offer_id":67713571848471,"sku":"3589","price":171.0,"currency_code":"AED","in_stock":true},{"title":"4L","offer_id":67713571881239,"sku":"1903","price":532.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1014\/6136\/0919\/files\/GYEON-Q2M-Foam-pH-neutral-1L.webp?v=1791430863","url":"https:\/\/bellemapple.com\/fr\/products\/gyeon-q-m-foam","provider":"powered by bellemapple","version":"1.0","type":"link"}